SCL Water is an experienced supplier of water pumps. Call 07813 047844 or WhatsApp. Products available for export and UK Sales (VAT not chargeable on exports outside the UK).
0 Cart
Added to Cart
    You have items in your cart
    You have 1 item in your cart
    Total
    Check Out Continue Shopping

    Xylem Hydrovar (variable speed drive)

    Product Features:

    • Intelligent, complete variable speed pump controller
    • Motor- or wall mounted
    • Easy to commission
    • Multi pump capability from 1 - 8 pumps

    Main control offerings:

    • Constant pressure
    • Constant flow
    • According to system curve
    • Via an 4-20 mA or 0-10 V external signal
    Hydrovar

    Hydrovar, the intelligent variable speed pump controller

    Hydrovar is the intelligent pump controller that matches the performance to the demand. The system consists of a variable speed drive (VSD), a control card, sensors, EMC filters and motor/system protection. There’s no need for an external control panel when using Hydrovar.

    The Hydrovar is easily mounted directly on the motor of the pump and will fit on any standard IEC motor. This makes the Hydrovar an excellent choice for retrofitting and upgrading of fixed speed systems.

    Easy to commission

    The quick start up guide and logic menu system makes the Hydrovar easy to set up and operate. Advanced programming features allow optimizing the Hydrovar for almost any duty condition.

    Energy savings potential

    A motor running at 80% of its maximum speed uses 48% less energy. With energy savings of up to 70% on partial loads alone, the typical investment payback period is less than two years depending on energy costs and pump operating times.

    Control offering

    • Multi-pump capability from 1 to 8 pumps
    • Constant pressure

    Constant flow

    • Temperature control
    • According to system curve
    • Via an 4-20 mA or 0-10 V external signal

    Safety

    • Fulfills EN 61000 standards
    • Embedded THDi filter to reduce harmonic interference
    • Stop the pumps at zero flow
    • Integrated soft start/stop: no water hammer and lower starting current

    Built in protection

    • Over/under voltage
    • Overcurrent/ output short protection
    • Low water level
    • Sensor failure
    • Motor over temperature
    • Inverter over temperature
    • Minimum threshold/ conveyor limit

    Specification

    • Power: from 1,5 kW to 22 kW
    • Power supply: single or three phase 50 or 60 Hz
    • Communication: RS485 interface, BACnet, Modbus, Wi-Fi card (optional)

    We are happy to discuss your requirements with you- for expert advice call or email us.

    Tel: +44 (0) 1769 575990

    Fax: +44 (0) 1769 574117

    Mobile: +44 (0) 7813 047844

    Email: info@sclwater.co.uk